Evidence & RegulatoryMedia & AwardsInsightsOrthoHeal AcademyInvestorsCareersContact

Home / Products / Full Arm Immobilizer

Full Arm Immobilizer

Elbow through wrist, in one washable, ventilated shell.

Full Arm Immobilizer — FlexiOH light-cured polymer immobilizer, product photograph
Full Arm Immobilizer in use

Above, at and inside the elbow — where a conventional cast is heaviest and hottest.

Intended uses

  • Proximal radius and ulna fractures (Monteggia, Galeazzi)
  • Distal humerus fractures
  • Elbow fractures — supracondylar and epicondylar fractures of the humerus
  • Mid-shaft fractures of radius and ulna

Caution

  • Not to be used where FlexiOH® would contact breached skin
  • Align the bone before curing — the shape cannot be adjusted afterwards
  • Single patient, single use; a cured immobilizer cannot be reused

United States · PDAC-approved HCPCS codes

L3980, L3981, L3762 — as listed in the OrthoHeal USA brochure 2025. Coding and billing are the responsibility of the treating facility; OrthoHeal Inc and its distribution partners can advise.

Book a demo Instructions for use (PDF) Brochure 2025 (PDF)

Sizing

Size chart — Full Arm Immobilizer

In centimetres. The zip and the flexible material add a margin of fit.

Full measurement guide and size chart →

SizeForearm circumference (cm)Max. arm circumference (cm)
XXS11.5–1512–14.5
XS15–18.514.5–18
S18.5–2322–26.5
M23–26.526.5–31
L26.5–3031–36
Application

Size it. Zip it. Cure it.

Application step 1: Size it
Step 1

Size it

Choose the variant and size. The pre-cured immobilizer is soft and mouldable.

Application step 2: Zip and lock it
Step 2

Zip and lock it

Wrap, zip and set the limb. Align the bone now — nothing changes after curing.

Application step 3: Cure it. Done.
Step 3

Cure it. Done.

Three to ten minutes under the RizyCure light. The polymer hardens into a rigid, ventilated shell.

Instructions for patients — recommended

  • Daily activities that need minimal mobility; shallow pools and bathtubs
  • Clean the skin in the open spaces regularly with a small brush or cotton bud
  • A hair-dryer on the cool setting dries trapped moisture
  • Elevate the limb to reduce swelling

Not recommended

  • Do not touch the outer surface during curing — it can burn
  • No heavy lifting or strenuous activity; no unnecessary pressure on the immobilizer
  • Do not apply or remove without your orthopaedic practitioner
  • Do not peel the foam layer; keep away from fire

Request a demo of the Full Arm Immobilizer

We bring sample units and a RizyCure light to your cast table.

WhatsApp enquiry